Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April 20078)

Send documentation comments to [e-mail]
2-179
Cisco MDS 9000 Family System Messages Reference
OL-15956-01
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
Error Message IVR-3-UNLOCK_FAILED: [chars].
Explanation
An error occurred while releasing the lock. The reason for the failure is shown in the
error message.
Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller
directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support.
Introduced Cisco MDS SAN-OS Release 2.0(1b).
Error Message IVR-3-VSAN_SEGMENTED: [chars].
Explanation VSAN is segmented. VSAN is removed from the topology graph and therefore
inter-VSAN traffic cannot flow through this VSAN.
Recommended Action To correct the segmentation, use one of the following methods:
– Modify one of the VSAN IDs so it is no longer a segmented VSAN.
– Add a different AFID to one of the VSANs so the AFID/VSAN combination is unique.
– Bring up a link in the segmented VSAN that goes between the two segments so that they are no
longer segmented.
Introduced Cisco MDS SAN-OS Release 2.1(1a).
Error Message IVR-3-ZS_POLICY_IS_DENY_NO_ACTIVE_ZS: Default zone behavior policy
changed to deny on VSAN [dec] and there is no active zoneset.
Explanation
The default zone behavior is changed to deny, and there is no active zone set.
Inter-VSAN zone members may not be able to communicate in this VSAN.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message IVR-3-ZS_POLICY_IS_PERMIT_NO_FORCE: Default zone behavior policy
changed to permit on VSAN [dec] and the force option is off.
Explanation
The default zone behavior is changed to permit and the force option is off. Inter-VSAN
zone set activation in this VSAN has failed.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.3(1).
Error Message IVR-3-ZS_POLICY_IS_PERMIT_ZS_DEACTIVATED: Default zone behavior
policy changed to permit on VSAN [dec] and regular zoneset deactivated.
Explanation
Default zone behavior is changed to permit and the regular zone set is deactivated.
Inter-VSAN zone members may not be able to communicate.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.3(4b).