Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April 20078)

Send documentation comments to [e-mail]
2-181
Cisco MDS 9000 Family System Messages Reference
OL-15956-01
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
Error Message IVR-4-ROUTE_REQUEST_TO_ACL_FAILED_AND_RETRYING: route [chars]
request vsan [dec] domain [dec] failed:[chars]. Retrying the request again.
Explanation This happens when either line cards are being upgraded or the ACL experienced an error
while processing the request.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 3.0(1).
Error Message IVR-4-UNKNOWN_NATIVE_VSAN: Unknown native VSAN for the virtual domain
[dec] in VSAN [dec] local native VSAN for the same virtual domain is [dec].
Explanation Could not determine the native VSAN of the currently advertised virtual domain in the
VSAN shown in the error message. This switch has learned of a device that is a member of the active
IVR zone, has the same domain ID, but belongs to another native VSAN.This device is not
advertised in that VSAN until the native VSAN information is resolved.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.3(1).
IVR-5
Error Message IVR-5-FCID_NAT_MODE_ACTIVATED: FCID network address translation (NAT)
mode has been activated.
Explanation
FC ID Network Address Translation (NAT) mode has been activated.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 2.1(1a).
Error Message IVR-5-FCID_NAT_MODE_DEACTIVATED: FCID network address translation
(NAT) mode has been deactivated.
Explanation
FC ID Network Address Translation (NAT) mode has been deactivated.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 2.1(1a).
Error Message IVR-5-IVR_ASSERTION_FAILED: Unexpected assertion failure in File
[chars] at Line [dec].
Explanation
A software assertion occurred in the IVR code.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 2.1(2).