Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April 20078)

Send documentation comments to [e-mail]
2-188
Cisco MDS 9000 Family System Messages Reference
OL-15956-01
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
LC_PORT_CHANNEL Messages
This section contains the line card PortChannel (LC_PORT_CHANNEL) messages.
LC_PORT_CHANNEL-SLOT#-0
Error Message LC_PORT_CHANNEL-SLOT#-0-HW_FAILURE: fatal error in configuring
[chars]: [chars].
Explanation
Fatal hardware error in the PortChannel configuration.
Recommended Action Reset the module.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message LC_PORT_CHANNEL-SLOT#-0-IDX_FULL: D_IDX table full (current [dec],
new [dec], total [dec]).
Explanation
Major error in the PortChannel configuration.
Recommended Action Reset the module.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
LC_PORT_CHANNEL-SLOT#-3
Error Message LC_PORT_CHANNEL-SLOT#-3-LC_PORT_CHANNEL_ERROR: [chars].
Explanation General error in the PortChannel configuration.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Deprecated Cisco MDS SAN-OS Release 3.0(1).
Error Message LC_PORT_CHANNEL-SLOT#-3-LC_PORT_CHANNEL_IDXMAP_FAILURE: could not
lookup port index for interface [chars].
Explanation
Could not look up the port index.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Deprecated Cisco MDS SAN-OS Release 3.0(1).