Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April 20078)

Send documentation comments to mdsfeedback-doc@cisco.com
2-193
Cisco MDS 9000 Family System Messages Reference
OL-15956-01
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
Error Message LICMGR-3-LOG_LIC_MESSAGE_ERROR: could not handle message: [chars] of
type [dec] from addr [dec]:[dec].
Explanation Could not handle an interprocess communications (IPC) message, of the type shown in
the error message, sent by a component running on the shown node and service access point (SAP).
Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller
directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message LICMGR-3-LOG_LIC_NO_LIC: No license(s) present for feature [chars].
Application(s) shutdown in [dec] days.
Explanation The feature has not been licensed. The feature will work for a grace period, then any
applications using the feature will be shut down.
Recommended Action Install the license to continue using the feature.
Introduced Cisco MDS SAN-OS Release 1.3(1).
Error Message LICMGR-3-LOG_LIC_SERVER_DOWN: License Server Down [dec].
Explanation
A connection to the license server could not be created.
Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller
directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message LICMGR-3-LOG_LIC_SPROM_LIC: Feature [chars] issued [dec] licenses
without a valid license file.
Explanation
The feature has been licensed the number of times shown in the error message without
a valid license file. This means one or more license files are missing for the feature and must be
reinstalled.
Recommended Action Install the license to continue using the feature.
Introduced Cisco MDS SAN-OS Release 1.3(1).
Error Message LICMGR-3-LOG_LIC_TOO_MANY_LIC: Only [dec] licenses are supported for
[chars] feature, where as [dec] licenses are installed.
Explanation
More licenses are installed than allowed.
Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller
directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support.
Introduced Cisco MDS SAN-OS Release 1.3(3a).