Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April 20078)

Send documentation comments to [e-mail]
2-197
Cisco MDS 9000 Family System Messages Reference
OL-15956-01
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
MODULE Messages
This section contains the module messages.
MODULE-2
Error Message MODULE-2-LCM_UPGRADE_DONE_GENERAL_FAIL: Upgrade ready message fails
seq [dec].
Explanation
Upgrade ready message failed.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 3.1(1).
Error Message MODULE-2-LCM_UPGRADE_OVER_FAIL: Upgrade over message returned [dec]
[hex] for SAP [dec].
Explanation
Upgrade done message failed.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 3.1(1).
Error Message MODULE-2-LCM_UPGRADE_READY_FAIL: Upgrade ready message returned [dec]
[hex] for SAP [dec].
Explanation
Upgrade ready message failed.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 3.1(1).
Error Message MODULE-2-LCM_UPGRADE_READY_GENERAL_FAIL: Upgrade ready message fails
seq [dec].
Explanation
Upgrade ready message failed.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 3.1(1).
Error Message MODULE-2-MOD_DIAG_FAIL: Module [dec] reported failure on ports
[dec]/[dec]-[dec]/[dec] ([chars]) due to [chars] in device [dec] (device error
[hex]).
Explanation
The module reported a failure in the runtime diagnostic. Module manager is going to
power cycle the module.
Recommended Action Collect information about the module by entering the show module internal
all module [decimaldigit] CLI command or by using a similar Fabric Manager procedure.