Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April 20078)

Send documentation comments to [e-mail]
2-217
Cisco MDS 9000 Family System Messages Reference
OL-15956-01
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
Error Message PLATFORM-0-SYS_LC_DRIVER_LOAD_FAILED: Failed to load linecard module
drivers.
Explanation Failed while trying to load drivers.
Recommended Action Image is possibly corrupt. Load a different image.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message PLATFORM-0-SYS_RESET: [chars] System shutdown in [dec] seconds.
Explanation
System shut down will occur in the number of seconds shown in the error message.
Recommended Action Enter the show env temperature CLI command or use a similar Fabric
Manager/Device Manager procedure to collect more information.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message PLATFORM-0-SYS_SHUTDOWN: System shutdown in [dec] seconds due to major
temperature alarm.
Explanation
System shut down in seconds because of temperature exceeding major threshold.
Recommended Action Use the showenvtemperature CLI command to collect more information.
Introduced Cisco MDS SAN-OS Release 3.0(1).
Error Message PLATFORM-0-MDS9124: System shutdown in [dec] seconds due to less than
4 fans operating.
Explanation
System shutdown in seconds because of less than 4 fans operating.
Recommended Action Enter a show env fan command to collect more information.
Introduced Cisco MDS SAN-OS Release 3.1(1).
Error Message PLATFORM-0-SYS_SHUTDOWN_FAN_REMOVAL: System shutdown in [dec] seconds
due to fan removal.
Explanation
System shut down will occur in the number of seconds shown because the fan has been
removed.
Recommended Action Enter the show env fan CLI command or use a similar Fabric Manager/Device
Manager procedure to collect more information.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message PLATFORM-0-SYS_SUP_DRIVER_LOAD_FAILED: Failed to load supervisor
module drivers.
Explanation
Failed while trying to load drivers.
Recommended Action Image is possibly corrupt. Load a different image.