Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April 20078)

Send documentation comments to [e-mail]
2-224
Cisco MDS 9000 Family System Messages Reference
OL-15956-01
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
Error Message PLATFORM-2-PFM_LC_REGISTRATION_FAIL: Could not register with Module
[dec].
Explanation Module registration failed.
Recommended Action Replace the module.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message PLATFORM-2-PFM_LOW_MEMORY_CONDITION: Module [dec] is running low on
memory. %ld percent used.
Explanation Supervisor is running low on memory.
Recommended Action Switchover.
Introduced Cisco MDS SAN-OS Release 3.2(1).
Error Message PLATFORM-2-PFM_LC_STATUS: Module [dec] powered up with [dec] status.
Explanation
Status for module that failed registration.
Recommended Action Replace the module.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message PLATFORM-2-PFM_PWR_MGMT_EPLD_VER_MISMATCH: Module [dec] Pwr Mgmt Epld
(Version-[dec]) needs to be upgraded.
Explanation
the ELPD needs to be upgraded. Using a wrong version of EPLD can result in
unexplained behaviour.
Recommended Action Upgrade the power managment EPLD. Refer to the Cisco MDS 9000 Family
CLI Configuration Guide.
Introduced Cisco MDS SAN-OS Release 3.0(1).
Error Message PLATFORM-2-PFM_STDBY_POWERUP_FAIL: standby supervisor failed to power
up.
Explanation
Standby supervisor failed to power up.
Recommended Action Replace the standby supervisor.
Introduced Cisco MDS SAN-OS Release 3.0(1).