Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April 20078)

Send documentation comments to [e-mail]
2-226
Cisco MDS 9000 Family System Messages Reference
OL-15956-01
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
Error Message PLATFORM-2-PS_OK: Power supply [dec] ok (Serial number [chars]).
Explanation
Power Supply is ok.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 3.0(1).
Error Message PLATFORM-2-PS_MISMATCH: Detected power supply [chars]. This reduces
the redundant power available to the system and can cause service disruptions
(Serial No. [chars]).
Explanation
Detected a new power supply that has reduced capacity compared to a previous power
supply.
Recommended Action Refer to power supply document on increasing or decreasing power supply
capacity, configuring power supplies, and so on. Enter the show environment power and show
platform internal info CLI command or use a similar Fabric Manager/Device Manager procedure
to collect more information.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message PLATFORM-2-PS_REMOVE: Power supply [dec] removed (Serial number
[chars]).
Explanation Power Supply is removed.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 3.0(1).
Error Message PLATFORM-2-PS_REMOVE_LAST: Unexpected removal of last power supply
[dec]. (Serial No. [chars]).
Explanation
Unexpected removal of the only power supply in the system.
Recommended Action Power supply unit may be faulty. Contact your customer support representative
to replace the unit.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message PLATFORM-2-PS_UNKNOWN: Detected an unknown power supply [dec] for
CISCO MDS 9500/9200 Multilayer Switches ((Serial number[chars]).
Explanation
Unable to determine power supply type. Default power supply types will be assumed.
Recommended Action Refer to the appropriate product hardware installation guide for information
on increasing or decreasing power supply capacity and configuring power supplies.
Introduced Cisco MDS SAN-OS Release 1.2(2a).