Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April 20078)

Send documentation comments to [e-mail]
2-230
Cisco MDS 9000 Family System Messages Reference
OL-15956-01
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message PLATFORM-5-MOD_REMOVE: Module [dec] removed (Serial No. [chars]).
Explanation The module has been removed.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message PLATFORM-5-MOD_TEMPFAIL: Module [dec] temperature sensor failed.
Explanation
Module contains a faulty temperature sensor.
Recommended Action Enter the show env temperature CLI command or use a similar Fabric
Manager/Device Manager procedure to collect more information.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message PLATFORM-5-MOD_TEMPOK: Module [dec] recovered from minor temperature
alarm.
Explanation Module exceeded a major temperature threshold.
Recommended Action Enter the show env temperature CLI command or use a similar Fabric
Manager/Device Manager procedure to collect more information.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message PLATFORM-5-PS_CAPACITY_CHANGE: Power supply PS[dec] changed its
capacity. possibly due to power cable removal/insertion (Serial number [chars]).
Explanation
A power supply capacity change has been detected.
Recommended Action Refer to power supply documentation on increasing and decreasing power
supply capacity, configuring power supplies, and other information about power supplies. Use the
show environment power CLI command and the show platform internal info CLI command to
collect more information.
Introduced Cisco MDS SAN-OS Release 3.1(2).
Error Message PLATFORM-5-PS_DETECT: Power supply [dec] detected but shutdown (Serial
No. [chars]).
Explanation
Power supply is detected, but it is shut down.
Recommended Action Enter the show environment power and show platform internal info CLI
commands or use a similar Fabric Manager/Device Manager procedure to collect more information.
Introduced Cisco MDS SAN-OS Release 1.2(2a).