Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April 20078)

Send documentation comments to [e-mail]
2-237
Cisco MDS 9000 Family System Messages Reference
OL-15956-01
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
Error Message PORT-5-IF_DOWN_ELP_FAILURE_ISOLATION: Interface [chars] is down
(Isolation due to ELP failure).
Explanation Exchange link parameter (ELP) failed on the interface.
Recommended Action Enter the show port internal info CLI command or use a similar Fabric
Manager/Device Manager procedure to check the ELP failure reason field.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message PORT-5-IF_DOWN_ELP_FAILURE_ISOLATION_CLASSF_PARAM_ERR: Interface
[chars] is down (Isolation due to ELP failure: class F param error).
Explanation Exchange link parameter (ELP) failed on the interface because of a class F parameter
error.
Recommended Action Configure the attached switch port correctly and try again.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message PORT-5-IF_DOWN_ELP_FAILURE_ISOLATION_CLASSN_PARAM_ERR: Interface
[chars] is down (Isolation due to ELP failure: class N param error).
Explanation Exchange link parameter (ELP) failed on the interface because of a class N parameter
error.
Recommended Action Configure the attached switch port correctly and try again.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message PORT-5-IF_DOWN_ELP_FAILURE_ISOLATION_INVALID_PAYLOAD_SIZE: Interface
[chars] is down (Isolation due to ELP failure: invalid payload size).
Explanation
Exchange link parameter (ELP) failed on the interface because of an invalid payload
size.
Recommended Action Configure the attached switch port correctly and try again.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message PORT-5-IF_DOWN_ELP_FAILURE_ISOLATION_INVALID_PORT_NAME: Interface
[chars] is down (Isolation due to ELP failure: invalid port name).
Explanation
Exchange link parameter (ELP) failed on the interface because of an invalid port name.
Recommended Action Configure the attached switch port correctly and try again.
Introduced Cisco MDS SAN-OS Release 1.2(2a).