Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April 20078)

Send documentation comments to [e-mail]
2-242
Cisco MDS 9000 Family System Messages Reference
OL-15956-01
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
Error Message PORT-5-IF_DOWN_INCOMPATIBLE_ADMIN_MODE: Interface [chars] is down
(Error disabled - Incompatible admin port mode).
Explanation The configured mode is not supported on this interface.
Recommended Action Enter the show port internal info command or use a similar Fabric Manager
procedure to determine the list of modes supported on this interface.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message PORT-5-IF_DOWN_INCOMPATIBLE_ADMIN_RXBBCREDIT: Interface [chars] is
down (Error disabled - Incompatible admin port rxbbcredit).
Explanation The configured receive B2B credit size is not supported.
Recommended Action Enter the show port internal info command or use a similar Fabric Manager
procedure to get the allowed receive B2B credit size.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message PORT-5-IF_DOWN_INCOMPATIBLE_ADMIN_RXBUFSIZE: Interface [chars] is
down (Error disabled - Incompatible admin port rxbufsize).
Explanation The configured receive buffer size is not supported.
Recommended Action Enter the show port internal info command or use a similar Fabric Manager
procedure to get the allowed receive buffer size.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message PORT-5-IF_DOWN_INCOMPATIBLE_ADMIN_SPEED: Interface [chars] is down
(Error disabled - Incompatible admin port speed).
Explanation
The configured speed is not supported on this interface.
Recommended Action Enter the show port internal info command or use a similar Fabric Manager
procedure to determine the range of speed supported on this interface.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message PORT-5-IF_DOWN_INITIALIZING: Interface [chars] is down (Initializing).
Explanation The interface is in the process of coming up.
Recommended Action If the interface is stuck in this state for a while, enter the show port internal
event-history command or use a similar Fabric Manager procedure to determine what it is waiting
for.
Introduced Cisco MDS SAN-OS Release 1.2(2a).