Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April 20078)

Send documentation comments to [e-mail]
2-247
Cisco MDS 9000 Family System Messages Reference
OL-15956-01
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
Error Message PORT-5-IF_DOWN_PORT_CHANNEL_MEMBERS_DOWN: Interface [chars] is down
(No operational members).
Explanation This is a PortChannel interface and all its members are operationally down.
Recommended Action Enable at least one of the PortChannel members.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message PORT-5-IF_DOWN_PORT_VSAN_MISMATCH_ISOLATION: Interface [chars] is
down (Isolation due to port VSAN mismatch).
Explanation The interface is isolated because of a mismatch in the configured port VSAN of the local
and remote ends.
Recommended Action Configure the port VSAN of the local and remote interfaces to be the same and
enter the shutdown and no shutdown CLI commands or use a similar Fabric Manager/Device
Manager procedure to bring up the ports.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message PORT-5-IF_DOWN_RCF_IN_PROGRESS: Interface [chars] is down (RCF in
progress).
Explanation There is an RCF in progress.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message PORT-5-IF_DOWN_SOFTWARE_FAILURE: Interface [chars] is down (Port
software failure).
Explanation
The software servicing the data path on the port has failed.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message PORT-5-IF_DOWN_SRC_MOD_NOT_ONLINE: Interface [chars] is down(Tunnel
source module not online).
Explanation
The module that has the source port of this FCIP interface is not online.
Recommended Action The module that has the source port for the FCIP link is coming online. Enter
the show module CLI command or use a similar Fabric Manager/Device Manager procedure to find
the module status.
Introduced Cisco MDS SAN-OS Release 1.2(2a).