Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April 20078)

Send documentation comments to mdsfeedback-doc@cisco.com
2-250
Cisco MDS 9000 Family System Messages Reference
OL-15956-01
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
Error Message PORT-5-IF_DOWN_TOO_MANY_INVALID_FLOGIS: Interface [chars] is
down(Suspended due to too many invalid flogis.
Explanation The port is suspended because of receiving a large number of invalid FLOGIs.
Recommended Action Check the host bus adapter (HBA) and enter the shutdown and no shutdown
CLI commands or use a similar Fabric Manager/Device Manager procedure on the port.
Introduced Cisco MDS SAN-OS Release 1.3(1).
Error Message PORT-5-IF_DOWN_TOO_MANY_INTR: Interface [chars] is down (Error
disabled - too many interrupts).
Explanation The port has received too many hardware interrupts.
Recommended Action Check the device attached to the port and replace it if needed.
Introduced Cisco MDS SAN-OS Release 2.0(1b).
Error Message PORT-5-IF_DOWN_UPGRADE_IN_PROGRESS: Interface [chars] is down
(Linecard upgrade in progress).
Explanation Upgrade of the line card software is in progress.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message PORT-5-IF_DOWN_VIRTUAL_IVR_DOMAIN_OVERLAP_ISOLATION: Interface
[chars] is down (Isolation due to virtual IVR domain overlap).
Explanation
Isolated because of a virtual IVR domain overlap.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 2.1(1a).
Error Message PORT-5-IF_DOWN_VSAN_MISMATCH_ISOLATION: Interface [chars] is down
(Isolation due to VSAN mismatch).
Explanation
This is a trunking interface and the VSANs configured do not match the VSANs
configured on the remote end.
Recommended Action Check the VSANs configured on the local end with the remote end.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message PORT-5-IF_DOWN_ZONE_MERGE_FAILURE_ISOLATION: Interface [chars] is
down (Isolation due to zone merge failure).
Explanation
The interface was isolated because of a failure during zone merge.
Recommended Action No action is required.