Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April 20078)

Send documentation comments to [e-mail]
2-252
Cisco MDS 9000 Family System Messages Reference
OL-15956-01
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
Error Message PORT-5-MODULE_BRINGUP_NOT_ALLOWED: Not allowing module [dec] to come
up for reason: [chars] ([hex]).
Explanation Module is not allowed to be operational due to the current system state.
Recommended Action Check the global index allocation using the show port index-allocation CLI
command. Also, check the module.'
Introduced Cisco MDS SAN-OS Release 3.0(1).
Error Message PORT-5-MODULE_INDEX_RESTORE_ERROR: Error in restoring indices for
module [dec]: reason [chars] ([hex]).
Explanation Restore of module index may fail due to overlap of indices.
Recommended Action No action is required.
Error Message PORT-5-MODULE_UNLIMITED_OSM_SEQ_FAILED: Enable/Disable of unlimited
oversubscription failed for module [dec].
Explanation
Interfaces of the module may be in an indeterminate state.
Recommended Action Reload the module.
Introduced Cisco MDS SAN-OS Release 3.1(1).
PORT-Resources Messages
This section contains the port resources (PORT-RESOURCES) messages.
Error Message PORT-RESOURCES-3-PRM_MSG_SEND_FAILURE: failed to send [chars] to sap
[dec]: [chars].
Explanation
An attempt to send a message failed.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 3.1(2).
Error Message PORT-RESOURCES-5-INVALID_PORT_ACTIV_PKG_LICENSE_FILE_INSTALLED:
Invalid on demand port activation license file is installed for module [dec].
Explanation
Interfaces may not acquire port activation licenses during installation.
Recommended Action Install a valid port activation license file.
Introduced Cisco MDS SAN-OS Release 3.1(1).