Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April 20078)

Send documentation comments to [e-mail]
2-253
Cisco MDS 9000 Family System Messages Reference
OL-15956-01
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
PORT-SECURITY Messages (Deprecated)
This section contains the port security (PORT-SECURITY) messages. These messages were deprecated
in Cisco MDS SAN-OS Release 1.3(4a). They were replaced by the “PORT_SECURITY Messages”
section on page 2-263.
PORT-SECURITY-2
Error Message PORT-SECURITY-2-ALLOC_FAILED: Memory allocation failed for size:[dec]
for [chars].
Explanation
Memory allocation failed for the entity and size shown in the error message.
Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller
directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support.
Introduced Cisco MDS SAN-OS Release 1.3(1).
Deprecated Cisco MDS SAN-OS Release 1.3(4a).
Error Message PORT-SECURITY-2-FEATURE_DISABLED: Feature [chars] disabled due to
[chars].
Explanation The feature is unavailable and will be disabled.
Recommended Action Install the correct license and reenable.
Introduced Cisco MDS SAN-OS Release 1.3(1).
Deprecated Cisco MDS SAN-OS Release 1.3(4a).
PORT-SECURITY-3
Error Message PORT-SECURITY-3-BINDING_CONFLICT: [chars] in VSAN [dec].
Explanation
An already logged in device is in conflict with the port security manager (PSM) active
binding configurations. The error message indicates the WWN of the login entity, interface and
VSAN.
Recommended Action Use the autolearn feature with activation. This message is informational in
nature, and the device will not be logged out. However, it will be denied login when it attempts to
log in the next time.
Introduced Cisco MDS SAN-OS Release 1.3(1).
Deprecated Cisco MDS SAN-OS Release 1.3(4a).