Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April 20078)

Send documentation comments to [e-mail]
2-278
Cisco MDS 9000 Family System Messages Reference
OL-15956-01
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
Error Message QOS-6-DISABLED_UP_MARKING: [chars].
Explanation
The QoS manager has disabled marking of time-critical control traffic as high-priority
traffic. Priority of such traffic is now not altered by QoS manager.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message QOS-6-E_PORT_ACL_SUCCESS: Successfully [chars] QOS ACL for interface
[chars].
Explanation
The QoS manager has successfully programmed or erased QoS related ACL when an E
port came up or went down for the interface shown in the error message.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message QOS-6-ENABLED_UP_MARKING: [chars].
Explanation The QoS manager has enabled marking of time-critical control traffic as high-priority
traffic.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message QOS-6-EXCESSIVE_DELAY: [chars].
Explanation
Excessive time taken for a processing event. The description of the event is shown in
the error message.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message QOS-6-FAILED_TO_SEND_HEARTBEAT: Failed to send heartbeat to system
manager: Reason=[chars].
Explanation
The QoS manager was unable to send a heartbeat to the system manager.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message QOS-6-GENERAL_EVENT: [chars].
Explanation The QoS manager has generated an important event. The description of the event is
shown in the error message.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.2(2a).