Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April 20078)

Send documentation comments to [e-mail]
2-286
Cisco MDS 9000 Family System Messages Reference
OL-15956-01
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
Error Message RIB-3-SEND_STANDBY: Cannot talk to standby rib.
Explanation
Lost a Routing Information Base (RIB) to Forwarding Information Base (FIB)
transaction log due to an interprocess communications (IPC) failure.
Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller
directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
RIB-4
Error Message RIB-4-CPU_HOG: Inactive or busy.
Explanation
Either the Routing Information Base (RIB) was not scheduled to run, or RIB was busy,
and RIB did not service the message or timer queue for an extended period.
Recommended Action Enter the debug rib error command, or use a similar Fabric Manager
procedure, then recreate the operation scenario to find out more details.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message RIB-4-DUP_FIB: Duplicate response from fib.
Explanation
The Routing Information Base (RIB) ignored duplicate response from the Forwarding
Information Base (FIB).
Recommended Action Enter the debug rib error command, or use a similar Fabric Manager
procedure, then recreate the operation scenario to find out more details.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message RIB-4-LATE_FIB: Late response from fib.
Explanation The Routing Information Base (RIB) ignored late response from the Forwarding
Information Base (FIB).
Recommended Action Enter the debug rib error command, or use a similar Fabric Manager
procedure, then recreate the operation scenario to find out more details.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message RIB-4-PC_LIMIT: PC number greater than 128 (ignored by RIB).
Explanation
The Routing Information Base (RIB) ignored the PC because the PC number was greater
than 128.
Recommended Action Use a PC number less than 128.
Introduced Cisco MDS SAN-OS Release 3.1(2).