Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April 20078)

Send documentation comments to [e-mail]
2-297
Cisco MDS 9000 Family System Messages Reference
OL-15956-01
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
Error Message SCSI target-2-PSS_INIT_FAIL: pss initialization failed due to error:
[hex].
Explanation SCSI target process persistent storage service (PSS) initialization failed due to the error
listed. No SCSI discovery can be performed.
Recommended Action Enter the show flash command or use a similar Fabric Manager/Device
manager procedure to collect more information. See PSS system error codes for the reason.
Introduced Cisco MDS SAN-OS Release 2.0(1b).
SCSI target-3
Error Message SCSI target-3-PROC_VSAN_GET_RATOV_FAIL: Failed to get vsan attribute
RATOV from VSAN Manager, error: [hex].
Explanation
SCSI target process used the vsan_get_global_value() API for RATOV and it failed
because of the error listed.
Recommended Action This is a non-fatal error. The default value for RATOV is used. Enter the show
process cpu and show system internal sysmgr service all commands or use a similar Fabric
Manager/Device Manager procedure to collect more information. See the VSAN Manager system
error codes for the reason.
Introduced Cisco MDS SAN-OS Release 2.0(1b).
Error Message SCSI target-3-PSS_CREATE_FAIL: pss create runtime database failed due
to error: [hex].
Explanation
SCSI target process persistent storage service (PSS) had a create runtime database
failure because of the error listed. No SCSI discovery can be performed.
Recommended Action Enter the show flash command or use a similar Fabric Manager/Device
Manager procedure to collect more information. See PSS system error codes for the reason.
Introduced Cisco MDS SAN-OS Release 2.0(1b).
Error Message SCSI target-3-PSS_DELETE_FAIL: pss delete runtime entry key:[hex]
failed due to error: [hex].
Explanation
SCSI target process persistent storage service (PSS) delete runtime entry key failed
because of the error shown in the error message.
Recommended Action Enter the show flash command or use a similar Fabric Manager/Device
Manager procedure to collect more information. See PSS system error codes for the reason.
Introduced Cisco MDS SAN-OS Release 2.0(1b).