Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April 20078)

Send documentation comments to [e-mail]
2-298
Cisco MDS 9000 Family System Messages Reference
OL-15956-01
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
Error Message SCSI target-3-PSS_MAX_KEY_FAIL: pss set runtime max key failed due to
error: [hex].
Explanation SCSI target process persistent storage service (PSS) set runtime max key failed because
of the error listed. No SCSI discovery can be performed.
Recommended Action Enter the show flash command or use a similar Fabric Manager procedure to
collect more information. See PSS system error codes for the reason.
Introduced Cisco MDS SAN-OS Release 2.0(1b).
Error Message SCSI target-3-PSS_MAX_VALUE_FAIL: pss set runtime max value failed
due to error: [hex].
Explanation SCSI target process persistent storage service (PSS) set runtime max value failed
because of the error shown in the error message. No SCSI discovery can be performed.
Recommended Action Enter the show flash command or similar Fabric Manager/Device Manager
procedure to collect more information. See PSS system error codes for the reason.
Introduced Cisco MDS SAN-OS Release 2.0(1b).
Error Message SCSI target-3-PSS_OPEN_FAIL: pss open runtime database failed due to
error: [hex].
Explanation SCSI target process persistent storage service (PSS) open runtime database failed
because of the error listed. No SCSI discovery can be performed.
Recommended Action Enter the show flash command or use a similar Fabric Manager/Device
Manager procedure to collect more information. See PSS system error codes for the reason.
Introduced Cisco MDS SAN-OS Release 2.0(1b).
Error Message SCSI target-3-PSS_RELOAD_FAIL: pss reload runtime database failed due
to error: [hex].
Explanation
SCSI target process persistent storage service (PSS) reload runtime database failed
because of the error listed.
Recommended Action Enter the show flash command or use a similar Fabric Manager/Device
Manager procedure to collect more information. See PSS system error codes for reason.
Introduced Cisco MDS SAN-OS Release 2.0(1b).
Error Message SCSI target-3-PSS_SNAPSHOT_DEBUG_FAIL: pss snapshot runtime debug to
uri:[chars] failed due to error: [hex].
Explanation
SCSI target process persistent storage service (PSS) snapshot of runtime debug to uri
failed because of the error listed.
Recommended Action Enter the show flash command or use a similar Fabric Manager/Device
Manager procedure to collect more information. See PSS system error codes for the reason.
Introduced Cisco MDS SAN-OS Release 2.0(1b).