Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April 20078)

Send documentation comments to [e-mail]
2-299
Cisco MDS 9000 Family System Messages Reference
OL-15956-01
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
Error Message SCSI target-3-PSS_SNAPSHOT_FAIL: pss snapshot runtime to uri:[chars]
failed due to error: [hex].
Explanation SCSI target process persistent storage service (PSS) snapshot of runtime to uri failed
because of the error shown in the error message.
Recommended Action Enter the show flash command or use a similar Fabric Manager/Device
Manager procedure to collect more information. See PSS system error codes for the reason.
Introduced Cisco MDS SAN-OS Release 2.0(1b).
Error Message SCSI target-3-PSS_STORE_FAIL: pss store runtime entry key:[hex]
val:[hex] failed due to error: [hex].
Explanation SCSI target process persistent storage service (PSS) store runtime entry key failed
because of the error shown in the error message.
Recommended Action Enter the show flash command or use a similar Fabric Manager/Device
Manager procedure to collect more information. See PSS system error codes for the reason.
Introduced Cisco MDS SAN-OS Release 2.0(1b).
SCSI target-7
Error Message SCSI target-7-SCSI_TARGET_DISCOVERED: SCSI target discovered
VSAN:[dec] FCID:[hex] prlisparm:[hex].
Explanation
SCSI target process discovered a VSAN with the FC ID and PRLI service parameter
shown in the error message
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 2.0(1b).
SAN Device Virtualization Messages
This section contains SAN Device Virtualization (SDV) messages.
SDV-6
Error Message SDV-6-BCAST_NOT_SUPPORTED: Broadcast attribute will be ignored for SDV
devices.
Explanation
A broadcast attribute will be ignored for SAN Device Virtualization (SDV) devices.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 3.1(2).