Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April 20078)

Send documentation comments to [e-mail]
2-310
Cisco MDS 9000 Family System Messages Reference
OL-15956-01
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
Introduced Cisco MDS SAN-OS Release 3.2(2).
Error Message SME_CPP-5-SME_ENABLED: SME Enabled.
Explanation SME service is enabled.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 3.2(2).
SME_CPP-SLOT#-2
Error Message SME_CPP-SLOT#-2-LOG_ERR_SME_ITL_MISCONFIG: Different physical LUNs
under same Tape Device - Device Name:[chars] Host PWWN:[chars] Tgt PWWN:[chars]
LUN Id:%Ld Serial Num:[chars] Serial Num:[chars].
Explanation
Different physical Logical unit numbers are on the same tape device.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 3.2(2).
Error Message SME_CPP-SLOT#-2-LOG_ERR_SME_LUN_MISCONFIG: Different physical LUNs
under same ITL - Old Serial Num:[chars] New Serial Num:[chars].
Explanation
Different physical Logical unit numbers are on the same ITL.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 3.2(2).
SME_CPP-SLOT#-3
Error Message SME_CPP-SLOT#-3-LOG_ERR_SME_DISK_TAPE_MISCONFIG: A disk misconfigured
under tape config - Device Name:[chars] Host PWWN:[chars] Tgt PWWN:[chars] LUN
Id:%Ld.
Explanation
A disk is misconfigured in the tape configuration.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 3.2(2).