Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April 20078)

Send documentation comments to [e-mail]
2-311
Cisco MDS 9000 Family System Messages Reference
OL-15956-01
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
SKSD Message
Error Message SKSD-5-SKSD_MKEY_INSTALL: Installing a Master Key on the
smartcard(s).
Explanation
Installing a new Master Key on the smart card(s).
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 3.0(1).
SPAN Messages
This section contains the switched port analyzer (SPAN) messages.
SPAN-2
Error Message SPAN-2-MEM_FULL: Memory allocation failed.
Explanation
Memory allocation failed.
Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller
directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
SPAN-3
Error Message SPAN-3-IPC_FAIL: IPC Error.
Explanation
Internal interprocess communications (IPC) error.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message SPAN-3-STATELESS_RESTART: Span is restarting stateless.
Explanation
Because of an unrecoverable error, the switched port analyzer (SPAN) is starting
stateless. The currently active sessions will not be preserved. You will have to reenter the entire
configuration.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Deprecated Cisco MDS SAN-OS Release 1.3(1).