Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April 20078)

Send documentation comments to [e-mail]
2-313
Cisco MDS 9000 Family System Messages Reference
OL-15956-01
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
SPAN-5
Error Message SPAN-5-ATL_VSAN_DEFAULT_ALL: Default to all VSANs for SPAN egress
session.
Explanation
Generation 2 fabric switches support only one VSAN filter for an egress SPAN session.
If a VSAN is specified, SPAN will default to use all VSANs for the egress SPAN session.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 3.1(1).
Error Message SPAN-5-SPAN_CFG_REJECT_SRC_VSAN_FILTER_NOT_SUPPORTED: Source
interface [[chars]] in dir [[chars]] removed from session [[dec]].
Explanation
Interface level VSAN filters are not supported.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message SPAN-5-SPAN_CFG_REJECT_VSAN_SRC_PRESENT: Source VSAN [[dec]] removed
from session [[dec]].
Explanation
Source VSANs were removed from the session because mixing of the interface and
VSANs is not supported.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message SPAN-5-SPAN_PSS_CORRUPTION: Span is starting stateless due to pss
corruption.
Explanation
Because of an unrecoverable persistent storage service (PSS) corruption error, the
switched port analyzer (SPAN) starts stateless without any configuration.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message SPAN-5-STATELESS_RESTART: Span is restarting stateless.
Explanation
Because of an unrecoverable error, the switched port analyzer (SPAN) is starting
stateless. The currently active sessions will not be preserved. You will have to reenter the entire
configuration.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.3(1).