Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April 20078)

Send documentation comments to [e-mail]
2-320
Cisco MDS 9000 Family System Messages Reference
OL-15956-01
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
Error Message SVC-3-NODE_ERR_MSG: (SVC [dec]/[dec] SS_EID_PL_ER_FC_ADAP_QUANTITY )
Logical Fibre Channel port missing [chars].
Explanation No active and functioning Fibre Channel port was detected by the software.
Recommended Action Reload the node. If the problem persists, replace the Caching Services Module.
Introduced Cisco MDS SAN-OS Release 1.3(1).
Error Message SVC-3-NODE_ERR_MSG: (SVC [dec]/[dec] SS_EID_PL_ER_FC_PORT_QUANTITY )
Logical Fibre Channel port reported not operational [chars].
Explanation No active and functioning logical Fibre Channel port was detected by the software.
Recommended Action Reload the node. If the problem persists, replace the Caching Services Module.
Introduced Cisco MDS SAN-OS Release 1.3(2a).
Error Message SVC-3-NODE_ERR_MSG: (SVC [dec]/[dec] SS_EID_PL_ER_NODE_WARMSTART )
Node warmstarted due to software error [chars].
Explanation The error that is logged in the cluster error log indicates a software problem in the
cluster.
Recommended Action 1. Ensure that the software is at the latest level on the cluster. 2. Run a
configuration dump and a logged data dump. Save the dump data. 3. Ask your customer support
representative for assistance. 4. Mark the error you have just repaired as fixed.
Introduced Cisco MDS SAN-OS Release 1.3(1).
Error Message SVC-3-NODE_ERR_MSG: (SVC [dec]/[dec] SS_EID_PL_ER_POWER_DOMAIN )
Power domain error [chars].
Explanation
The two nodes in an I/O group are on the same Caching Services Module.
Recommended Action Determine what the configuration should be. Remove one of the nodes and add
a node to the I/O group that is not on the same Caching Services Module.
Introduced Cisco MDS SAN-OS Release 1.3(1).
Error Message SVC-3-NODE_ERR_MSG: (SVC [dec]/[dec]
SS_EID_VG_ER_MDISK_GROUP_OFFLINE ) A Managed Disk group is offline [chars].
Explanation
A managed disk group is offline.
Recommended Action 1. Repair the enclosure or disk controller. 2. Start a cluster discovery
operation. 3. Check managed disk status. If all managed disks show a status of online, mark the error
you have just repaired as fixed.
Introduced Cisco MDS SAN-OS Release 1.3(1).