Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April 20078)

Send documentation comments to [e-mail]
2-332
Cisco MDS 9000 Family System Messages Reference
OL-15956-01
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
Error Message SVC-4-NODE_WARNING_MSG: (SVC [dec]/[dec] SS_EID_EC_ER_FORK_FAILED )
Internal error - fork failed [chars].
Explanation The process cannot launch the I/O program. Node was rebooted because of this error.
Recommended Action If this error is repeated continuously, follow these steps: 1. Reinstall the code
on the node. The node will then have to be removed and added back to the cluster. 2. Ensure that the
software is at the latest level on the cluster. If not, upgrade the cluster and if necessary repeat step 1
with the latest level of code. 3. Ask your customer support representative for assistance, if the error
continues.
Introduced Cisco MDS SAN-OS Release 1.3(1).
Error Message SVC-4-NODE_WARNING_MSG: (SVC [dec]/[dec]
SS_EID_EC_ER_INTERNAL_EXIT_LOGIC_ERR ) Internal error - bad exit code [chars].
Explanation Node was warmstarted because of an internal logic error.
Recommended Action 1. Ensure that the software is at the latest level on the cluster. 2. Ask your
customer support representative for assistance.
Introduced Cisco MDS SAN-OS Release 1.3(1).
Error Message SVC-4-NODE_WARNING_MSG: (SVC [dec]/[dec]
SS_EID_EC_ER_INTERNAL_UNKNOWN_EXEC_MODE ) Internal error - run mode [chars].
Explanation Node was rebooted because of an internal logic error.
Recommended Action 1. Ensure that the software is at the latest level on the cluster. 2. Ask your
customer support representative for assistance.
Introduced Cisco MDS SAN-OS Release 1.3(1).
Error Message SVC-4-NODE_WARNING_MSG: (SVC [dec]/[dec]
SS_EID_EC_ER_IOP_EXITED_DUE_TO_SIGNAL ) Internal error - signal caused exit
[chars].
Explanation The I/O process exited because of a signal that was not caught. Node was warm started
because of this error.
Recommended Action 1. Ensure that the software is at the latest level on the cluster.2. Ask your
customer support representative for assistance.
Introduced Cisco MDS SAN-OS Release 1.3(1).