Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April 20078)

Send documentation comments to [e-mail]
2-359
Cisco MDS 9000 Family System Messages Reference
OL-15956-01
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
Error Message SVC-6-SVC_SYSLOG_CL_UNJOIN: Node [chars] has left cluster [chars].
Explanation
SAN Volume Controller (SVC) interface has left cluster.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.3(1).
Error Message SVC-6-SVC_SYSLOG_LC_WWN_PURGE: All WWNs for module [dec] have been
purged[chars].
Explanation
SAN Volume Controller (SVC) line card has purged all WWNs.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.3(1).
Error Message SVC-6-SVC_SYSLOG_VSAN_INACTIVE: VSAN [dec] suspended.
Explanation VSAN was suspended. This can cause other warnings.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.3(1).
SVC-7
Error Message SVC-7-NODE_DEBUG_MSG: [chars].
Explanation
Syslog message from a SAN Volume Controller (SVC) interface node.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.3(1).
SVC_BATTERY Messages
This section contains the SAN Volume Controller battery (SVC_BATTERY) messages.
SVC_BATTERY-SLOT#-2
Error Message SVC_BATTERY-SLOT#-2-BATTERY_NOT_OPERATIONAL: Battery [dec]
temperature [dec] C is outside the operational range (-10C to 65C).
Explanation
The battery temperature is outside the operational range (-10 to 65
0
C).
Recommended Action Enter the show environment fan CLI command or use an equivalent Fabric
Manager/Device Manager procedure to determine fan operation and take action to cool down the
switch.
Introduced Cisco MDS SAN-OS Release 1.3(4a).