Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April 20078)

Send documentation comments to [e-mail]
2-360
Cisco MDS 9000 Family System Messages Reference
OL-15956-01
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
Error Message SVC_BATTERY-SLOT#-2-BATTERY_NOT_PRESENT: Battery [dec] is not
present.
Explanation The module does not have a sufficient number of batteries. Two batteries are needed.
Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller
directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support.
Introduced Cisco MDS SAN-OS Release 1.3(1).
Error Message SVC_BATTERY-SLOT#-2-CHARGING_DISABLED: Temperature outside permitted
range for battery charging (5C-40C).
Explanation The temperature of the module is not within the range to permit battery charging.
Recommended Action Make sure the temperature of the module is between 5 and 40
0
C.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message SVC_BATTERY-SLOT#-2-CHARGING_FAILURE: Charging failure in battery
[dec] ([hex]).
Explanation The module encountered failures while charging a battery.
Recommended Action Replace the battery.
Introduced Cisco MDS SAN-OS Release 1.3(1).
Error Message SVC_BATTERY-SLOT#-2-CLOCK_INCORRECT: System clock is running behind,
battery conditioning will be affected.
Explanation
The system clock is running behind the actual time. This will affect the battery
conditioning.
Recommended Action Enter the clock set CLI command or use an equivalent Fabric Manager/Device
Manager procedure to set the correct time.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message SVC_BATTERY-SLOT#-2-COMMUNICATION_FAILURE: Communication failure
with battery [dec].
Explanation
The module encountered failures while communicating with a battery.
Recommended Action Replace the battery. If you purchased Cisco support through a Cisco reseller,
contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco
Technical Support.
Introduced Cisco MDS SAN-OS Release 1.3(1).