Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April 20078)

Send documentation comments to [e-mail]
2-365
Cisco MDS 9000 Family System Messages Reference
OL-15956-01
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
Error Message SYSMGR-2-CFGWRITE_ABORTED_LOG: Unable to open a log file for the new
configuration: [chars] (error-id [hex]). Aborting configuration copy.
Explanation An attempt to copy the running configuration to startup configuration has failed because
a log file could not be created.
Recommended Action If the problem persists, issue the init system CLI command from the
switch(boot)# prompt to initialize the configuration partition. Note: This is a disruptive command.
This command will initialize the switch, reset the entire internal disk, and reformat the bootflash:
partition.
Introduced Cisco MDS SAN-OS Release 1.3(1).
Error Message SYSMGR-2-CFGWRITE_TIMEOUT_ABORT: Configuration copy aborted by
timeout.
Explanation A service failed to store its configuration in the time-out period. The configuration save
operation was terminated.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 2.0(1b).
Error Message SYSMGR-2-CFGWRITE_USER_ABORT: Configuration copy aborted by the user.
Explanation
The user typed CTRL+C while the configuration was being saved. The configuration
save operation was terminated.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message SYSMGR-2-CONVERT_FUNC_FAILED: Conversion function failed for service
"[chars]" (error-id [hex]).
Explanation
The conversion function failed for this service.
Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller
directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message SYSMGR-2-CONVERT_FUNC_NOTFOUND: Conversion function not found for
service "[chars]".
Explanation
The system could not find an appropriate conversion function for this service.
Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller
directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support.
Introduced Cisco MDS SAN-OS Release 1.2(2a).