Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April 20078)

Send documentation comments to [e-mail]
2-366
Cisco MDS 9000 Family System Messages Reference
OL-15956-01
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
Error Message SYSMGR-2-CONVERT_LIB_NOTFOUND: Conversion library not found for
service "[chars]".
Explanation The system could not find the conversion library for this service.
Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller
directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message SYSMGR-2-CONVERT_STARTUP_ABORTED: Conversion of startup-config
failed.
Explanation The conversion of the startup configuration was terminated.
Recommended Action If the problem persists, issue the init system CLI command from the
switch(boot)# prompt to initialize the configuration partition. Note: This is a disruptive command.
This command will initialize the switch, reset the entire internal disk, and reformat the bootflash:
partition.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message SYSMGR-2-CONVERT_ZIPPING_FAILED: Failed to zip the converted startup
configuration.
Explanation Conversion of the startup configuration failed when system was trying to zip the
converted configuration.
Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller
directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message SYSMGR-2-CREATE_DONEFILE_FAILED: Creating /var/run/sysmgr.initdone
failed with return value: ([dec]).
Explanation
The initialization of the system could not complete.
Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller
directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message SYSMGR-2-DELETE_BINARY_STARTUP_FAILED: Deletion of binary startup
config failed during boot (error-id [hex]).
Explanation
T deletion of the binary startup configuration failed during boot.
Recommended Action If the problem persists, issue the init system CLI command from the
switch(boot)# prompt to initialize the configuration partition. Note: This is a disruptive command.
This command will initialize the switch, reset the entire internal disk, and reformat the bootflash:
partition.
Introduced Cisco MDS SAN-OS Release 2.0(1b).