Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April 20078)

Send documentation comments to [e-mail]
2-376
Cisco MDS 9000 Family System Messages Reference
OL-15956-01
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
Error Message SYSMGR-2-REDSTATE_SETFAILED: Failed to set redundancy state: ret_val
([dec]).
Explanation The local supervisor is unable to get the redundancy state.
Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller
directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message SYSMGR-2-REDUNDANCY_CHANNEL_FAILURE: Remote sup will be rebooted
since its coming up as active when local sup is still active.
Explanation Remote supervisor is becoming active although local supervisor is still active. As a
result, the local supervisor will cause the remote supervisor to reset itself.
Recommended Action If the problem persists, contact customer support. If you purchased Cisco
support through a Cisco reseller, contact the reseller directly. If you purchased support directly from
Cisco Systems, contact Cisco Technical Support.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message SYSMGR-2-REDUNDANCY_HEARTBEAT_FAILURE: Heartbeat between active and
standby on the redundancy channel not working for last [dec] minutes.
Explanation This supervisor is not receiving a heartbeat on the redundancy channel from the other
supervisor. This can result in problems during switchover and switchover may fail.
Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller
directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message SYSMGR-2-RESTART_SYSTEM_LOG: We will be restarting system soon.
Explanation The system will restart because it was trying to do a hot switchover before all the state
was transferred to this supervisor. A cold switchover has begun.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message SYSMGR-2-RESTORE_RUNTIME_DB_FAILED: Restoring of runtime database for
fabric switch upgrade failed during boot (error-id [hex]).
Explanation
The runtime database cannot be restored during the boot process for the fabric switch
upgrade.
Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller
directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support.
Introduced Cisco MDS SAN-OS Release 2.1(1a).