Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April 20078)

Send documentation comments to [e-mail]
2-380
Cisco MDS 9000 Family System Messages Reference
OL-15956-01
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
Error Message SYSMGR-3-CFGSNAPSHOT_FAILED: Configuration snapshot failed (error-id
[hex]).
Explanation The requested configuration snapshot has failed. The error message shows the error ID
representing the failure reason.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message SYSMGR-3-CFGWRITE_FAILED: Configuration copy failed (error-id [hex]).
Explanation
The requested configuration copy has failed. The error message shows the error ID
representing the failure reason.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message SYSMGR-3-CFGWRITE_REJECT: Discarding request for configuration
[chars]: configuration action already in progress.
Explanation
Another instance of the CLI command copy running-config startup-config is in
progress.
Recommended Action Wait for the other instance to complete.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message SYSMGR-3-CFGWRITE_SRVFAILED: Service "[chars]" failed to store its
configuration (error-id [hex]).
Explanation
A required service has failed to store its configuration into the startup configuration.
The overall configuration copy is considered failed.
Recommended Action Enter the show process CLI command or use a similar Fabric Manager/Device
Manager procedure to verify that the system is running properly and the service is behaving
correctly.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message SYSMGR-3-CFGWRITE_SRVTIMEOUT: Service [chars] failed to store its
configuration in the timeout period.
Explanation
The listed service failed to respond to a request to store its configuration into the
startup-configuration. The overall configuration copy has failed.
Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller
directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support.
Introduced Cisco MDS SAN-OS Release 2.0(1b).