Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April 20078)

Send documentation comments to [e-mail]
2-390
Cisco MDS 9000 Family System Messages Reference
OL-15956-01
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
Error Message SYSMGR-5-CFGWRITE_STARTED: Configuration copy started (PID [dec]).
Explanation
On the active supervisor, this message indicates that the system has started to service a
copy running-config startup-config CLI command requested by the user. On the standby
supervisor, this message indicates that the system is synchronizing the startup configuration from
the active supervisor.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message SYSMGR-5-CONVERT_STARTUP_STARTED: Configuration conversion started
(PID [dec]).
Explanation
The system has started conversion of the startup configuration. This occurs either on
system boot or during the course of an upgrade.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message SYSMGR-5-DELETE_BINARY_STARTUP_STARTED: Deletion of binary startup
configuration started (PID [dec]).
Explanation
The system is the binary startup configuration, because of an error in the conversion of
the startup conversion.
Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller
directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support.
Introduced Cisco MDS SAN-OS Release 2.0(1b).
Error Message SYSMGR-5-HANDSHAKE_DONE: Handshake with service "[chars]"
successfully performed.
Explanation
Handshake with the listed service was successful.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message SYSMGR-5-HANDSHAKE_FAILED: Handshake with service "[chars]" failed
since send failed: [chars] (error-id [hex]).
Explanation
Handshake with a service failed because system manager could not send handshake
response to it.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.2(2a).