Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April 20078)

Send documentation comments to mdsfeedback-doc@cisco.com
2-407
Cisco MDS 9000 Family System Messages Reference
OL-15956-01
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
Error Message SYSTEMHEALTH-4-OHMS_SUP_CF_CRC_INIT_ERRORS: Compact Flash firmware
CRC checksum procedure encountered an error during initialization on module [dec]
Reason: [chars].
Explanation
Compact Flash CRC checksum initializations failed.
Recommended Action Check the compact flash on the board and any relevant system(mis)
configurations.
Introduced Cisco MDS SAN-OS Release 3.1(3).
Error Message SYSTEMHEALTH-4-OHMS_SUP_CF_CRC_INTERN_ERRORS: Compact Flash firmware
CRC checksum procedure cannot proceed due to internal errors on module [dec].
Explanation
Compact Flash CRC checksum procedure was terminated due to internal errors.
Recommended Action Restarting the cf-crc-check using system health clear-errors module <x>
cf-crc-check. If the condition persists, schedule a downtime and replace the compact flash on the
affected module.
Introduced Cisco MDS SAN-OS Release 3.1(3).
Error Message SYSTEMHEALTH-4-OHMS_SUP_CF_RECALLED: Compact Flash on module [dec] is
healthy at this time. But this has been identified a recalled part. Please replace
it soon since it can go bad anytime.
Explanation
Compact Flash model has data retention issues and needs to be replaced.
Recommended Action Schedule a downtime and replace the compact flash on the affected module.
Introduced Cisco MDS SAN-OS Release 3.1(3).
Error Message SYSTEMHEALTH-4-OHMS_SUP_CF_UNRESPONSIVE: Recalled Compact Flash on
module [dec] is unresponsive.
Explanation
The compact flash model has data retention issues and needs to be replaced.
Recommended Action Schedule a downtime and replace the compact flash on the affected module.
Introduced Cisco MDS SAN-OS Release 3.1(3).
Error Message SYSTEMHEALTH-4-OHMS_SUP_CF_REFLASH_INTERN_ERRORS: Compact Flash
firmware re-flash procedure cannot proceed due to internal errors on module [dec].
Explanation
Compact Flash firmware reflash procedure terminated due to internal errors.
Recommended Action Restarting the test using system health clear-errors module <x> cf-re-flash. If
the condition persists, schedule a downtime and replace the compact flash on the affected module.
Introduced Cisco MDS SAN-OS Release 3.3(1a).