Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April 20078)

Send documentation comments to [e-mail]
2-419
Cisco MDS 9000 Family System Messages Reference
OL-15956-01
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
Error Message TLPORT-6-PORTDOWN: Translation Port [chars] DOWN.
Explanation
A port configured as a TL port is down and out of operation. The error message shows
the Interface-ID string that identifies the TL port. This is an informational message.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message TLPORT-6-PORTUP: Translation Port [chars] UP.
Explanation A port configured as a TL port is up and operational. The error message shows the
Interface-ID string that identifies the TL port. This is an informational message.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
TP C Messages
TPC stands for Third Party Copy. It is for the feature Network Accelerated Serverless Backup (NASB).
Error Message TPC-SLOT#-5-LOG_ERR_TPC_DPP_DEAD: VSAN :[dec] VT pWWN :[chars] DPP
died.
Explanation
The data path processor (DPP) associated with the virtual target has crashed.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 3.0(1).
Error Message TPC-SLOT#-5-LOG_ERR_TPC_VT_ACT_FAILED: VSAN :[dec] VT pWWN :[chars]
VT Activate failed.
Explanation
The activate step for a virtual target has failed.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 3.0(1).
Error Message TPC-SLOT#-5-LOG_ERR_TPC_VT_CREATE_FAIL: VSAN :[dec] VT pWWN :[chars]
VT and NPort creation FAILED !!!.
Explanation
The virtual target and nport creation failed.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 3.0(1).