Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April 20078)

Send documentation comments to [e-mail]
2-10
Cisco MDS 9000 Family System Messages Reference
OL-15956-01
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message ACL-6-ACL_SPAN_SRC_CONFIG_STATUS: [chars] [chars].
Explanation This message reports the ACL SPAN source configuration event status.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message ACL-6-ACL_STATUS: ACL Status: [chars].
Explanation
This message reports the ACL status.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message ACL-6-ACL_UPDATE_SSRAM_QOS_EVENT_STATUS: [chars] [chars].
Explanation
This message reports the ACL update SSRAM for QoS event status.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
ACLTCAM Messages
This section contains the access control list ternary content addressable memory (ACLTCAM)
messages.
ACLTCAM-2
Error Message ACLTCAM-2-ACL_TCAM_CONFIG_READ_FROM_DRIVER_FAILED: [chars] [dec],
Error: [hex].
Explanation
The system is unable to read the configuration from the forwarding engine ASIC driver.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message ACLTCAM-2-ACL_TCAM_CONFIG_WRITE_TO_DRIVER_FAILED: [chars] [dec],
Error: [hex].
Explanation
Unable to write configuration to forwarding engine ASIC driver for the reasons shown
in the error message.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 3.0(1).