Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April 20078)

Send documentation comments to [e-mail]
2-436
Cisco MDS 9000 Family System Messages Reference
OL-15956-01
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
Error Message VPM-2-PSS_ERROR: [chars].
Explanation
The virtual port manager encountered an error while operating on a persistent storage
database.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message VPM-2-VPMON_CRIT: [chars] [dec].
Explanation The virtual port manager (VPMON) daemon experienced a critical problem.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 2.0(1b).
Error Message VPM-2-VPMON_DPP_DOWNLOAD: HB failure, Restarting the DPP [dec].
Explanation
The virtual port manager (VPMON) daemon is downloading the data path processor
(DPP) again.
Recommended Action Intelligent switch application programming interface (ISAPI) users need to
re-download the configuration data to the fast path.
Introduced Cisco MDS SAN-OS Release 2.0(1b).
Error Message VPM-2-VPMON_DPP_RELOAD_FORCE: Issuing of force reload to command for
DPP(s) [chars] is: [chars].
Explanation
VPMON daemon critical action message. Reason is shown in the message.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 2.1(1a).
VPM-3
Error Message VPM-3-PSS_SYNC_TO_STNDBY_FAILED: PSS TYPE=[chars] KEY=[chars].
Explanation Could not send persistent storage service (PSS) synchronization notification to the
standby supervisor. The PSS type, operation, and key are shown in the error message.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.2(2a).