Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April 20078)

Send documentation comments to [e-mail]
2-437
Cisco MDS 9000 Family System Messages Reference
OL-15956-01
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
Error Message VPM-3-SEND_TO_ILC_FAILED: [chars].
Explanation
The virtual port manager could not send to the intelligent line card.(ILC for DG=%s,
at slot=%d processor=%d and SAP=%d).
Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller
directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message VPM-3-SEND_TO_SNMP_AGENT_FAILED: [chars].
Explanation The virtual port manager could not send to the SNMP agent (for DG=%s).
Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller
directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message VPM-3-UNKNOWN_MSG: Recvd. from Node=[dec] SAP=[dec].
Explanation
The virtual port manager has received an unknown message from the node and service
access point (SAP) shown in the error message. This information is for debugging only.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message VPM-3-VPM_PSS_CORRUPTED: [chars] PSS found corrupted.
Explanation The virtual port manager has detected corruption in one of its persistent information
database. The database was recreated.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
VPM-4
Error Message VPM-4-PSS_VERSION_MISMATCH: PSS [dec] Code [dec].
Explanation
There was a version mismatch between the virtual port manager and one of its
persistent storage databases. The persistent information has been translated to the new format.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.2(2a).