Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April 20078)

Send documentation comments to [e-mail]
2-441
Cisco MDS 9000 Family System Messages Reference
OL-15956-01
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
VPM-SLOT# Messages
This section contains the virtual port manager slot (VPM-SLOT) messages.
VPM-SLOT#-2
Error Message VPM-SLOT#-2-CPP_CATASTROPHIC_ERROR: ERROR: Component ([chars]) caused
critical error please reboot ILC.
Explanation
The listed component caused a critical error.
Recommended Action Restart the line card.
Introduced Cisco MDS SAN-OS Release 2.0(1b).
VRRP_CFG Messages
This section contains the Virtual Router Redundancy Protocol (VRRP_CFG) messages.
VRRP_CFG-2
Error Message VRRP_CFG-2-ALLOC_MEMORY: Memory allocation failed.
Explanation The service failed to allocate a block of dynamic memory.
Recommended Action Check the system memory. If memory is low, reset the switch.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
VRRP_CFG-3
Error Message VRRP_CFG-3-INIT_FAILED: Initialization failed. Component [chars].
Explanation
The service failed to start. The failure occurred while initializing the component shown
in the error message.
Recommended Action Enter the show processes CLI command or use a similar Fabric
Manager/Device Manager procedure to check the status of the other processes and debug the
specified component.
Introduced Cisco MDS SAN-OS Release 1.2(2a).