Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April 20078)

Send documentation comments to mdsfeedback-doc@cisco.com
2-445
Cisco MDS 9000 Family System Messages Reference
OL-15956-01
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
VRRP_ENG-5
Error Message VRRP_ENG-5-INTERFACE_DOWN: Cannot start the VR[chars] [dec] since the
interface [chars] is down.
Explanation
The specified VR is enabled but cannot change state from init. The specified interface
is down or does not have a primary IP address configured.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 3.0(1).
Error Message VRRP_ENG-5-INTERFACE_STATE_CHANGE: Interface [chars] state changed to
[chars].
Explanation
The interface specified has changed state. This could have triggered a VRRP status
change.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 3.0(1).
Error Message VRRP_ENG-5-STARTING: VRRP Engine service started.
Explanation
The service successfully started.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 3.0(1).
Error Message VRRP_ENG-5-VR_STATE_CHANGE: VR[chars] ID [dec] on interface [chars]
state changed to [chars].
Explanation The status of the specified virtual router has changed to [chars].
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 3.0(1).
VRRP_ENG-6
Error Message VRRP_ENG-6-VSHA_RESULT: VR ID [dec] on interface [chars] state change
request result [chars].
Explanation
The virtual router specified has received an invalid advertisement.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.2(2a).