Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April 20078)

Send documentation comments to [e-mail]
2-446
Cisco MDS 9000 Family System Messages Reference
OL-15956-01
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
Error Message VRRP_ENG-6-INTERFACE_DOWN: Cannot start the VR [dec] since the
interface [chars] is down.
Explanation The specified virtual router is enabled but cannot change state from initializing. The
specified interface is down or does not have a primary IP address configured.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message VRRP_ENG-6-INTERFACE_STATE_CHANGE: Interface [chars] state changed to
[chars].
Explanation The interface specified has changed state This could have triggered a VRRP status
change.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message VRRP_ENG-6-STARTING: VRRP Engine service started.
Explanation
The service successfully started.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message VRRP_ENG-6-VR_STATE_CHANGE: VR ID [dec] on interface [chars] state
changed to [chars].
Explanation
The status of the specified virtual router has changed.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message VRRP_ENG-6-VSHA_RESULT: VR ID [dec] on interface [chars] state change
request result [chars].
Explanation
The result of the request for status change on the virtual router (with VSHA extension)
specified is shown in the error message.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.2(2a).