Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April 20078)

Send documentation comments to [e-mail]
2-447
Cisco MDS 9000 Family System Messages Reference
OL-15956-01
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
VSAN Messages
This section contains the virtual SAN (VSAN) messages.
VSAN-2
Error Message VSAN-2-PROGRAM_EXIT: process exiting with reason: [chars].
Explanation The Virtual SAN (VSAN) manager process is exiting with the reason shown in the error
message.
Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller
directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
VSAN-3
Error Message VSAN-3-CFS_OPERATION_FAILED: cfs [chars] operation failed : [chars].
Explanation
The Cisco Fabric Services (CFS) operation has failed.
Recommended Action Check the reason for the failure of the CFS operation and rectify the problem.
Introduced Cisco MDS SAN-OS Release 2.0(1b).
Error Message VSAN-3-MEM_ALLOC_FAILED: alloc failed for size:[dec].
Explanation Memory allocation failed.
Recommended Action Enter the show process memory CLI command or use a similar Fabric
Manager/Device Manager procedure to see memory usage for processes.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message VSAN-3-MESSAGE_ERROR: could not handle message:[chars] of type [dec]
sent by addr [dec]:[dec].
Explanation
Received an interprocess communications IPC message sent by a component running
on the node and SAP shown in the error message.
Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller
directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support.
Introduced Cisco MDS SAN-OS Release 1.2(2a).