Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April 20078)

Send documentation comments to [e-mail]
2-13
Cisco MDS 9000 Family System Messages Reference
OL-15956-01
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
Error Message ACLTCAM-2-ACL_TCAM_PSS_FAILURE: Failed to do PSS operation: [chars],
reason: [hex].
Explanation Failed to do a persistent storage service (PSS) operation because of the reason shown
in the error message.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.3(1).
Error Message ACLTCAM-2-PSS_OPEN_FAILED: PSS open failed - [hex].
Explanation
A persistent database handle could not be obtained for ACL TCAM. The error message
shows the error code associated with this problem.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message ACLTCAM-2-RECONS_FAILED: Reconstruction of TCAM contents failed
during upgrade - [hex].
Explanation
During a nondisruptive upgrade, the ACL TCAM contents were not properly
reconstructed. The error message shows the error code associated with this problem.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
ACLTCAM-3
Error Message ACLTCAM-3-REGISTER_FAILED: Could not register to MTS opcode [chars]
- error [hex].
Explanation
The ACLTCAM process could not register to the notifications shown in the error
message. The error message also shows the error code for this problem.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
ACLTCAM-6
Error Message ACLTCAM-6-ACL_TCAM_STATUS: Status: [chars].
Explanation
This message reports the ACL TCAM status.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 2.0(1b).