Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April 20078)

Send documentation comments to [e-mail]
2-454
Cisco MDS 9000 Family System Messages Reference
OL-15956-01
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
Error Message WWN-2-TYPE1_CRIT: [dec] (< [dec] %) Remain.
Explanation
The WWN manager has only the shown percent or less of WWNs remaining.
Recommended Action Add additional WWNs by programming a new secondary MAC address and
its range.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message WWN-2-TYPES2_5_CRIT: [dec] (< [dec] %) Remain.
Explanation The WWN manager has only the shown percent or less of the WWNs of Network
Address Authority (NAA) types 2 and 5 remaining.
Recommended Action Add additional WWNs by programming a new secondary MAC address and
its range.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
WWN-3
Error Message WWN-3-PSS_SYNC_TO_STNDBY_FAILED: PSS TYPE=[chars] KEY=[chars].
Explanation
Could not send persistent storage service (PSS) synchronization notification to the
standby supervisor module. PSS type, operation, and key are shown in the error message.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message WWN-3-RELEASE_ERR: Cant Rel. WWN [chars].
Explanation WWN manager received a request to release a WWN that cannot be released.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message WWN-3-RELEASE_ERR_UNKNOWN: Unknown WWN [chars] [chars].
Explanation
WWN manager received a request to release a WWN that could not have been allocated
by this WWN manager because of the reason shown in the error message.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.2(2a).