Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April 20078)

Send documentation comments to [e-mail]
2-459
Cisco MDS 9000 Family System Messages Reference
OL-15956-01
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
XBAR Messages
This section contains the crossbar (XBAR) messages.
XBAR-3
Error Message XBAR-3-MEM_FULL: Memory allocation failed.
Explanation Memory allocation failed.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
XBAR-5
Error Message XBAR-5-ARB_INIT_MOD_INTR_FAIL: Arbiter reported failure to enable
interrupt for module [dec] return_code [hex] ([chars]).
Explanation
The supervisor has experienced an arbiter setup failure.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 3.0(1).
Error Message XBAR-5-ARB_INIT_MOD_REMOVE_FAIL: Arbiter reported failure to remove
module [dec] return_code [hex] ([chars]).
Explanation
The supervisor has experienced an arbiter setup failure.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 3.0(1).
Error Message XBAR-5-ARB_INIT_PORT_FAIL: Arbiter reported failure to register port
[dec] in group [dec] return_code [hex] ([chars]).
Explanation
The supervisor has experienced an arbiter setup failure.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 3.0(1).
Error Message XBAR-5-ARBITER_INIT_FAILURE: Re-initializing Arbiter.
Explanation
The supervisor module has experienced an arbiter setup failure.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.2(2a).