Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April 20078)

Send documentation comments to [e-mail]
2-460
Cisco MDS 9000 Family System Messages Reference
OL-15956-01
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
Error Message XBAR-5-MOD_CONNECTION_REATTEMPT: Re-attempting Xbar connection with
module [dec].
Explanation The module has experienced a setup failure on connecting the module to the fabric.
Recommended Action Enter the show xbar internal event-history command or use a similar Fabric
Manager/Device manager procedure to collect more informations about the crossbar component.
Power cycling the module may fix the problem.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message XBAR-5-XBAR_INIT_FAIL: Xbar [[dec].[dec]] reported failure durinig
intialization return_code [hex] ([chars]).
Explanation The supervisor has experienced an xbar setup failure.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 3.0(1).
Error Message
Error Message XBAR-5-XBAR_INIT_FAILURE: Xbar [chars] initialization failed.
Explanation
The supervisor module has experienced a fabric initialization failure. The supervisor
module rebooted. In case of dual supervisors, a switchover will occur.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.2(2a)
Error Message XBAR-5-XBAR_PORT_CHECK_SYNC_FAIL: Xbar [[dec].[dec]] reported failure
to check sync on port [dec] return_code [hex] ([chars]).
Explanation
The supervisor has experienced an xbar setup failure.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 3.0(1).
Error Message XBAR-5-XBAR_PORT_CONTINUE_SYNC_FAIL: Xbar [[dec].[dec]] reported
failure to continue sync on port [dec] return_code [hex] ([chars]).
Explanation
The supervisor has experienced an xbar setup failure.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 3.0(1).