Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April 20078)

Send documentation comments to [e-mail]
2-465
Cisco MDS 9000 Family System Messages Reference
OL-15956-01
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
Error Message ZONE-2-ZS_ALIAS_LIMIT_EXCEEDED: The limit for maximum number of
aliases exceeded.
Explanation The number of aliases configured has exceeded the maximum number of aliases
allowed per VSAN. Because of this, a distribution or merge operation may fail.
Recommended Action Make sure the number of aliases is less than the maximum allowed in a VSAN.
Introduced Cisco MDS SAN-OS Release 2.0(1b).
Error Message ZONE-2-ZS_ATTR_GROUP_LIMIT_EXCEEDED: The limit for maximum number of
attribute groups exceeded.
Explanation The number of attribute groups configured has exceeded the maximum number of
attribute groups allowed in a VSAN. Because of this, distribution or merge operation may fail.
Recommended Action Make sure the number of attribute groups is less than the maximum allowed
in a VSAN.
Introduced Cisco MDS SAN-OS Release 2.0(1b).
Error Message ZONE-2-ZS_CHANGE_ACA_FAILED: ACA failed : [chars].
Explanation
The zone server cannot acquire change authorization.
Recommended Action Verify the interoperability mode on all the switches or retry later.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message ZONE-2-ZS_CHANGE_ACQUIRE_AUTH_FAILED: Acquire authorization failed on
VSAN [dec].
Explanation
The zone server cannot acquire authorization on the VSAN.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 2.0(1b).
Error Message ZONE-2-ZS_CHANGE_ACTIVATION_FAILED: Activation failed.
Explanation
The zone server cannot activate the zone set.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message ZONE-2-ZS_CHANGE_ACTIVATION_FAILED_RESN: Activation failed : reason
[chars].
Explanation
The zone server cannot activate because of reason shown in the error message.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.2(2a).