Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April 20078)

Send documentation comments to [e-mail]
2-470
Cisco MDS 9000 Family System Messages Reference
OL-15956-01
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
Error Message ZONE-2-ZS_LUN_MEMBER_LIMIT_EXCEEDED: The limit for maximum number of
lun members exceeded.
Explanation The number of LUN members configured has exceeded the maximum number of LUN
members allowed across all VSANs. Because of this, distribution or merge operation may fail.
Recommended Action Make sure the number of LUN members is less than the maximum allowed
across all VSANs.
Introduced Cisco MDS SAN-OS Release 2.0(1b).
Error Message ZONE-2-ZS_MALLOC_FAILURE: Memory allocation failed for size [dec].
Explanation
Memory allocation failed.
Recommended Action Restart the process.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message ZONE-2-ZS_MEMBER_LIMIT_EXCEEDED: The limit for maximum number of
members exceeded.
Explanation
The number of members configured has exceeded the maximum number of members
allowed across all VSANs. Because of this, distribution or merge operation may fail.
Recommended Action Make sure the number of members is less than the maximum allowed across
all VSANs.
Introduced Cisco MDS SAN-OS Release 2.0(1b).
Error Message ZONE-2-ZS_MERGE_ADJ_NO_RESPONSE: Adjacent switch not responding,
Isolating Interface [chars] (VSAN [dec]).
Explanation
Interface on the VSAN was isolated because the adjacent switch is not responding to
zone server requests.
Recommended Action Flap the interface.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message ZONE-2-ZS_MERGE_FAILED: Zone merge failure, Isolating interface
[chars].
Explanation
Interface isolated because of a zone merge failure.
Recommended Action Compare the active zone set with the adjacent switch by entering the zone
merge interface CLI command or by using a similar Fabric Manager/Device Manager procedure.
Introduced Cisco MDS SAN-OS Release 1.2(2a).