Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April 20078)

Send documentation comments to [e-mail]
2-473
Cisco MDS 9000 Family System Messages Reference
OL-15956-01
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
Error Message ZONE-2-ZS_TCAM_SWITCHED_TO_SOFT_ZONING_MODE: Switched to soft zoning
: Reason: Hard zoning disabled.
Explanation Switched to soft zoning. Hard zoning was disabled due to a TCAM programming
failure.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 3.1(1).
Error Message ZONE-2-ZS_VIRTUAL_DOMAIN_INCONSISTENT: IVR reporting virtual domain
different from rib and domain manager in vsan [dec].
Explanation IVR reporting the virtual domain is different from the Routing Information Base (RIB)
and Domain Manager in the VSAN.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 3.1(1).
Error Message ZONE-2-ZS_ZONE_LIMIT_EXCEEDED: The limit for maximum number of zones
exceeded.
Explanation The number of zones configured has exceeded the maximum number of zones allowed
across all VSANs. Because of this, the distribution or merge operation may fail.
Recommended Action Make sure the number of zones is less than the maximum allowed across all
VSANs.
Introduced Cisco MDS SAN-OS Release 2.0(1b).
Error Message ZONE-2-ZS_ZONE_SET_LIMIT_EXCEEDED: The limit for maximum number of
zonesets exceeded.
Explanation
The number of zone sets configured has exceeded the maximum number of zone sets
allowed across all VSANs. Because of this, distribution or merge operation may fail.
Recommended Action Make sure the number of zone sets is less than the maximum allowed across
all VSANs.
Introduced Cisco MDS SAN-OS Release 2.0(1b).
ZONE-3
Error Message ZONE-3-LZ_UNKNOWN_MSG: Recvd. from Node=[dec] SAP=[dec].
Explanation The LUN read-only zoning process has received an unknown message. This
information is for debugging only.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.2(2a).