Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April 20078)

Send documentation comments to [e-mail]
2-15
Cisco MDS 9000 Family System Messages Reference
OL-15956-01
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
Error Message BIOS_DAEMON-SLOT#-2-BIOS_DAEMON_LC_ERROR: BIOS Sector ([dec]) is
write protected
Explanation The BIOS on the module is write protected.
Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller
directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support.
Introduced Cisco MDS SAN-OS Release 2.0(1b).
Error Message BIOS_DAEMON-SLOT#-2-BIOS_DAEMON_LC_PRI_BOOT_FAIL: Primary BIOS is
corrupted or un-bootable.
Explanation The primary BIOS on a module is corrupted.
Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller
directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support.
Introduced Cisco MDS SAN-OS Release 3.0(1).
BOOTVAR Messages
This section contains the boot variable (BOOTVAR) messages.
BOOTVAR-2
Error Message BOOTVAR-2-ALLOC_MEMORY: Memory allocation failed.
Explanation The service failed to allocate memory.
Recommended Action Check to see if the switch is low on memory and reset the switch if it is low.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message BOOTVAR-2-AUTOSYNC_FAILED: Image autosync failed. Reason: [chars]
([hex]).
Explanation
The image synchronization has failed.
Recommended Action Ensure that there is enough space on the flash. Verify the system high
availability status.
Introduced Cisco MDS SAN-OS Release 1.2(2a).