Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April 20078)

Send documentation comments to [e-mail]
2-474
Cisco MDS 9000 Family System Messages Reference
OL-15956-01
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
Error Message ZONE-3-ZS_ACTIVATION_FAILED_DUE_TO_QOS_DISABLED: Activation failed
due to qos not enabled.
Explanation Activation of zone set failed because QoS was not enabled.
Recommended Action Make sure QoS is enabled and reactivate the zone set in the VSAN.
Introduced Cisco MDS SAN-OS Release 2.0(1b).
ZONE-4
Error Message ZONE-4-LZ_OTHER_CMD_TO_ZONED_OUT_LUN: FCP command [hex] received from
SID=[chars] to DID=[chars] for LUN=[chars].
Explanation
The LUN read-only zoning process has received. FCP command received from the
source ID to the destination ID for a zoned out LUN.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message ZONE-4-ROZ_WRITE_ACCESS_TO_READ_ONLY_LUN: FCP command [hex] received
from SID=[chars] to DID=[chars] for LUN=[chars].
Explanation
The LUN read-only zoning process has received an FCP command from the source ID
to the destination ID for a zoned out LUN.
Explanation No action is required.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message ZONE-4-ZS_BROADCAST_LUN_WARNING: LUN member(s) and Broadcast attribute
are present in zone [chars] in vsan [dec]. Broadcast violations can occur for LUN
members.
Explanation
Broadcast violations can happen in the named zone in the named VSAN because it has
LUN zone members.
Recommended Action No action is required.
Error Message ZONE-4-ZS_CHANGE_LC_UPGRADE_IN_PROGRESS: Change protocol request is
received from domain [dec] when linecard upgrade is in progress.
Explanation
A change request has been received from the domain when a line card upgrade is in
progress. The change request is rejected.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.2(2a).